Відео

I want to do this exact set up. Elco 9.9 on 18ft pontoon. Is there a step by step installation video for this? Especially the steering part. I got a 50hp Honda, maybe I can use the same steering.

Thanks for the video. Were you able to set up the elco motor with your steering wheel system pretty easily. Was the motor equipped with a steering tilt or did you have to buy separate? TIA for any help.

Im planning to put this motor on a Linder 445 Max, weight 500 lbs boat only (227kg) and with a battery weighing 145 lbs (66kg) and myself weighing roughly the same. Total weight with me, boat, battery and engine will end up at 875 lbs (around 400 kg). Length of the boat is 14,6 ft (445cm) and it planes very easy with my current petrol engine with 25Hp. Usually I dont have to go much above 4000 rpm to keep the boat on plane. Do you believe I can plane my boat with the EP-20 engine or do I have to go for the EP-30?

12 is not impressive for a supposed 20hp motor, it should push that jon boat 25+

I'm trying to get an elco motor now but I'm running into phone apps. You literally have download an app to your phone to see what your motor is doing. I can't believe it.

Hello, I was wondering if you could tell me what the top speed of the 20ft pontoon boat was found to be with the EP-20 motor?

Music is not at all helpful to an instructional video.

People don't give a shit about heat and noise, they want numbers. Give a hard numbers example of an XYZ sized battery, and how long and how fast you'll go on XYZ battery

Now that’s cool!

How difficult/inadvisable to mount an EP-20 or 50 outboard to a cabin cruiser swim platform for a low-cost and low-noise marina kicker motor? Throw in an electric hydraulic pump and I bet you can use the existing rudder control for steering.

Why did you put music in the one part of the video we all wanted to hear?

Thanks for the info. I am exploring various setups and these instructions help to see how to mix water and electricity safely.

I guess I could say there nice and would lover the have one but there to Rich for my blood 🩸 with everything gone and going up even more of the cost of living I just can’t see it . Especially at my age.

I want it

cheàp éktruç bóàt óñly $24000

26.4 Kilowatts......right?

Well done Elco for giving us quiet alternative options. Bravo Zulu.

What of the slave children mining the chemicals for the batteries?

I hate to say it, but there is ZERO customer support with this company. After running out of battery with their Victron BMV-700 battery monitor showing an 85% charge, I have not been able to get anyone at the Company to support their product, return an email or answer a call. BEWARE. Being on a river with no power is not a place you want to be!

I hate to say it, but there is ZERO customer support with this company. After running out of battery with their Victron BMV-700 battery monitor showing an 85% charge, I have not been able to get anyone at the Company to support their product, return an email or answer a call. BEWARE. Being on a river with no power is not a place you want to be!

I hate to say it, but there is ZERO customer support with this company. After running out of battery with their Victron BMV-700 battery monitor showing an 85% charge, I have not been able to get anyone at the Company to support their product, return an email or answer a call. BEWARE. Being on a river with no power is not a place you want to be!

I hate to say it, but there is ZERO customer support with this company. After running out of battery with their Victron BMV-700 battery monitor showing an 85% charge, I have not been able to get anyone at the Company to support their product, return an email or answer a call. BEWARE. Being on a river with no power is not a place you want to be!

I hate to say it, but there is ZERO customer support with this company. After running out of battery with their Victron BMV-700 battery monitor showing an 85% charge, I have not been able to get anyone at the Company to support their product, return an email or answer a call. BEWARE. Being on a river with no power is not a place you want to be!

le recomiendo transmitir en español gracias

People in the market for electric motors need to know what features the motor has, what batteries and voltage it needs. Weight? Autonomy? Installation? Maintenance? COST??? No need for 80s music. I would also like to HEAR the actual motor. I was looking to have something for my 21ft sailboat to get out and back in the marina when I go sailing. No idea what your product does. Let me know if you have a long foot version.

ABYC TE30 is out of date. Please do not propagate misinformation. You should admit upfront that there is essentially no feasible way to correctly and safely install your system to comply with ABYC guidelines.

Wooo

Motherfuckers, I am sitting in a boat at a season opening day in Latvia, struggling to start your suit motor for an hour and looking for any troubleshooting advice while freezing to death And all you give is this shitty fuckboy, I am fuming

what is that horrendous high pitch whine

This is a great video and extremely helpful. Thank you. <3

Price?

I have a 7 meter boat. If I were to buy a 100hp inboard motor, should I buy 12 batteries? Where do I put all these batteries on the boat? Is there that much room?

I have a ‘69 Silverline Shark, a 14 foot runabout with a 33 hp Evinrude ski Twin on it. (Actual length is 13’6”.) I keep thinking about and looking at converting to electric power, but I still want to run in the mid 20’s with it. So I need probably 40 to 50 continuous hp outboard power. I keep hoping Elco will come up with something suitable, but their 50 hp outboard is still way to heavy, expensive and not suited for that application. This boat with the outboard conversion configuration does not yet have the speed, power nor endurance to truly get “on top” and plane the way it was designed to run originally. I am not sure if it just lacks the power, or if it’s just too RPM limited with the motor and not able to spin the propeller fast enough to generate the necessary speed to get the boat to fully lift out of the water and plane. It appears to be in the semi plaining mode, which is highly inefficient energy wise for this hull.

I have an old baldor ac electric motor with the air filter on top. It's a 75hp 240v ac electric motor and was hoping to pair it with a marine alternator and 10,000 watt ac to dc power inverter or dc to ac inverter/not sure because I'm new to this arena. Anyways, I was hoping to run my system with 3 marine batteries, 1 to start the motor an the other 2 to get split between the alternator, and the 2 batteries in series to go back to the original motor battery. Does any1 know if my set-up will work to recycle n recharge itself so I don't ever have to worry about energy ever again?

Would like to put one in the XLT 1200 .

Can you please tell me if you have any information what is the proper regeneration back to the battery at what speed ? I really appreciate it would be a big help making a purchase decision on what type of electric motors on regeneration while under sail with EP-20?

Can you please tell me if you have any information what is the proper regeneration back to the battery at what speed ? I really appreciate it would be a big help making a purchase decision on what type of electric motors on regeneration while under sail with EP-20?

Can this push a 1988 17 ft mc Cree craft boat?

Can this be used on a 10 ft zodiac inflatable?

I really wish you would do a video on a 50 foot Trawler pleasure yacht, so we can see a true life application of what's needed to get it moving on the water. I'll be buying my old Trawler in a year or so. If a new video doesn't comes out between now and then ... Maybe we can work something out ... lol Have a Great Day and Stay Safe ‼️ 😊

Please re maKE THIS VIDEO AND SKIP THE NOISY BACKGROUND MUSIC. THE VOICE OF THE SPEAKER IS MOSTLY INAUDIBLE BECAUSE OF THE LOUD SOUND TRACK MUSIC. USELESS.

Hey, Elco team. I am interested in your products, specifically this EP-14. Though I have some pause with your figures. Your EP-14 is rated at 14 HP, yet you claim an input power of 6.24 kW. 6.24kW is around 8 HP. Is this a mistake?

I want one for my dinghy in Los Angeles

They covered up the Motor Sound,so now I'll have to find another Elco video

for 17f boat about 800-1000 lbs. run with 50hp 98v/200A. (amg or lithium battery). with cruise speed. 15-20 mph. how long can I run on this set up.

I wonder what was the status of electric motors for this applications during 1900

I'm thinking of finishing a Bruce Roberts Voyager 495 boat. Presently the hull is finished and I want to turn it into a 'solar boat', with a trawler like deck supporting 8kW of solar panels. I love the idea of installing an Elco EP100, but at $20,000 +, the cost of the motor is out of my budget. I'm thinking of using a Nissan Leaf car drivetrain along with the battery pack from the car. For about $8-10,000 I can install the Leaf drivetrain which incorporates the charger and inverter. Any thoughts anyone?

How many amps does that draw at WOT?

Potato cam

Hey I have a 9.9 Elco and I cannot find any info on lower unit oil change. Need some help. THANKS